luckoraenterprises@gmail.com - GST NO. : 06AAGCL5230N1ZC
- Send Email
Hospital Beds And Patient Care Furnitures
Leading Exporters, Wholesaler and Trader of 2 Function Mechanical Hospital Fowler Bed, 3 Function Electric Hospital ICU Bed, 3 Function Mechanical Hospital ICU Bed, 3 Section Obstetric Delivery Bed, 5 Function DX Electric Hospital ICU Bed, 5 Function Mechanical Hospital ICU Bed, ABS Panel Hospital Plain Bed, CRCA Pediatric Bed, Economy Full Fowler Bed, Economy Semi Fowler Bed, Full Fowler Hospital Bed, General Surgery Hydraulic OT Table, Hi Low Mechanical Hospital ICU Bed, Hospital Attendant Bed, Hospital Semi Fowler Bed, Mild Steel Baby Cradle, Mild Steel Delivery Table, Mild Steel Hospital Delivery Bed, Mild Steel Hospital Plain Bed, Obstetric Delivery Bed, Patient Examination Couch and Plain Examination Table from Ambala.
| Business Type | Exporter, Supplier, Trader |
| Application | Hospitals |
| Feature | 4 Section Top,Four Pieces ABS Side Rails,Removable ABS Head And Foot Panel,Noiseless 5 |
| Finishing | Pretreated & Epoxy Powder Coated |
| Material | Mild Steel |
| Type | Hospital Fowler Bed |
| Driven Type | Mechanical |
| Dimensions | 2140L X 910W X 600H MM |
• Bed Frame work made of Rectangular M.S. CRCA Tube.
• 4 section top made up of perforated CRCA MS Sheet.
• Four Pieces ABS Molded individual side rails.
• Removable & interchangeable high quality beautiful ABS head
panel and foot panel.
• Bed Mounted on noiseless 5″ Dia Castor. 2 with brakes.
• Overall Size: 2140L x 910W x 600H MM.
• Finish: Pretreated & Epoxy Powder Coated
| Business Type | Exporter, Supplier, Trader |
| Application | ICU,Hospital |
| Type | Electric Hospital Bed |
| Finishing | Epoxy Powder Coated |
| Material | MS Sheet & Stainless Steel |
| Size | L 2140mm X W 940mm X H 460-700mm |
| Function | 3 (Adjustable Height, Safety Side Rails, Telescopic IV Rod) |
| Voltage | 220-240 V AC |
| Frequency | 50 Hz |
• Size: L 2140mm × W 940mm × H 460-700mm (Adjustable Height).
• Four Pieces individual ABS molded safety side rails.
• Removable & interchangeable high quality beautiful ABS engineering plastic head panel and foot panel.
• All functions controlled with high quality Advance Linear Actuator
• Motor system, 220 – 240 V AC, 50 Hz. (110 V on request).
• Frame work made of Rectangular CRCA steel Tube
• 4 section top made up of perforated CRCA MS Sheet.
• SS. Telescopic IV Rod with Provision for I.V. Rod on all sides of the bed
• Finish: Well Pretreated &fully Epoxy Powder Coated
| Business Type | Exporter, Supplier, Trader |
| Application | Hospital ICU Bed |
| Feature | Locking And Corner Buffer,Collapsible Side Railings,Telescopic IV Rod With 4 Locations |
| Size | 2090L X 910W X 460-700H Mm |
| Finishing | Pretreated & Epoxy Powder Coated |
| Material | Stainless Steel |
| Driven | Mechanical |
| Shape | Rectangular |
| Foot And Panel Material | ABS Molded |
• ABS Molded Head and Foot panel with locking and corner buffer .
• With Collapsible SS side railings.
• Frame work made of Rectangular M.S. Tube.
• Bed Mounted on 5″ Dia. Castor. 2 with brakes.
• S.S. Telescopic IV Rod with 4 Locations
• Overall Approx. Size: 2090L x 910W x 460-700H MM.
• Finish: Pretreated & Epoxy Powder Coated
| Business Type | Exporter, Supplier, Trader |
| No Of Section | 3 Section |
| Dimensions | 72″L x 22″W x 30″H |
| Frame Material | Steel |
| Frame Coating | Pre Treated & Epoxy Powder Coated |
| Type | Obstetric Delivery Bed |
| Additional Features | Knee Crutches With Height Adjustable |
| Certification | CE Certified |
• Approx. Dimensions: 72″L x 22″W x 30″H
• Rectangular & square tube frame work mounted on PVC stumps
• Three sections cushioned top.
• Backrest Seat , Leg section adjustable by hand lever
• A pair of knee crutches with height adjustable.
• Finish :Pre treated & Epoxy powder coated.
| Business Type | Exporter, Supplier, Trader |
| Application | Hospital ICU Bed |
| Color | White |
| Material | Stainless Steel, ABS,Engineering Plastic,CRCA Steel Tube,MS Sheet |
| Size | L 2140mm X W 940mm X H 460-700mm |
| Frequency | 50 Hz |
| No Of Functions | 5 Function |
| Voltage | 220-240 V AC |
| Function | Adjustable Height, Safety Side Rails, Removable Head And Foot Panels, Telescopic IV Rod |
| Control System | Advance Linear Actuator Motor System |
We offer a premium 5 Function DX Electric Hospital ICU Bed designed for optimal patient care. This hospital bed, measuring L 2140mm X W 940mm X H 460-700mm, is made of durable ABS material in a sleek white color. Ideal for hospital ICU settings, it operates at a frequency of 50 Hz with a voltage of 220-240 V AC. The bed features an adjustable height function powered by an advanced Linear Actuator Motor System. As an Exporter, Supplier, and Trader, we provide top-quality medical equipment to enhance healthcare facilities.
| Business Type | Exporter, Supplier, Trader |
| Application | Hospital ICU Bed |
| Finishing | Pretreated & Epoxy Powder Coated |
| Material | ABS Molded Head And Foot Panel |
| Feature | Durable, Locking Corner Buffer,Collapsible SS Side Railings,5 |
| Driven | Mechanical |
| No Of Function | 5 Function |
| Dimensions | 2090L X 910W X 460-700H Mm |
- ABS Molded Head and Foot panel with locking
- and corner buffer .
- With Collapsible SS side railings.
- Frame work made of Rectangular M.S. Tube.
- Bed Mounted on 5″ Dia Castor. 2 with brakes.
- S.S. Telescopic IV Rod with 4 Locations
- Overall Approx Size: 2090L x 910W x 460-700H MM.
- Finish: Pretreated & Epoxy Powder Coated
| Business Type | Exporter, Supplier, Trader |
| Type | Hospital Bed |
| Panel Material | ABS |
| Material | CRCA MS Sheet |
| Feature | Four I.V. Rod |
| Dimensions | 206L X 90W X 60H Cms |
| Application | Hospital |
| Shape | Rectangular |
• Frame work made of Rectangular / Square M.S. Tube
• Top made of perforated CRCA MS sheet.
• ABS Head & Foot Panel
• Location for Four I.V. Rod.
• Bed Mounted on 4″ Dia Castor 2 with brakes
• Overall Size: 206L x 90W x 60H cms.
| Business Type | Exporter, Supplier, Trader |
| Type | Pediatric Bed |
| Material | CRCA (Cold Rolled Close Annealed) Steel |
| Color | Silver |
| Packaging | Cardboard Box |
| Usage | Pediatric Patient Care |
| Finish | Epoxy Powder Coating Finish |
| Size | 370L x 760W x 600H mm |
| Shape | Rectangular |
| Business Type | Exporter, Supplier, Trader |
| Style | Modern |
| Type | Full Fowler Bed |
| Material | CRCA Tubes,CRCA Sheet |
| Finishing | Pretreated & Epoxy Powder Coated |
| Sections | Four |
| Operation | Manual |
| Control System | Hand Crank |
• Frame work made of rectangular CRCA tubes
• Perforated CRCA sheet top in four sections.
• Manually Operated Back rest & knee rest by hand Crank control system.
• Finish: Pretreated & Epoxy Powder Coated
| Business Type | Exporter, Supplier, Trader |
| Finishing | Powder Coated |
| Type | Economy Semi Fowler Bed |
| Size | 1900mm X 900mm X 600mm |
| Material | Mild Steel |
| Adjustability | Adjustable Backrest |
| Application | Hospital Or Homecare |
| Feature | Perforated Sheet Platform, Adjustable Backrest |
• Size 1900mm*900mm*600mm
• Perforated Sheet Platform And Adjustable Backrest.
• Ms Head And Foot Panels.
• Ms Pawder Coated Frame Work.
| Business Type | Exporter, Supplier, Trader |
| Application | Hospitals |
| Feature | Collapsible Side Railings,Castor Wheels With Brakes |
| Finishing | Epoxy Powder Coated |
| Material | Mild Steel |
| Type | Full Fowler Hospital Bed |
| Foot And Panel Material | ABS Molded |
| Sections | 4 |
| Dimensions | 210 L X 90 W X 60 H |
• ABS Molded Head and Foot panel
• Frame work made of rectangular M.S. Tube in Hospital
Fowler Bed
• 4 Section top made of perforated MS Sheet
• With Collapsible SS side railings.
• Four locations for IV Rod
• Bed mounted on 100 mm dia castor two with brakes
• Overall Size : 210 L x 90 W x 60 H cms
• Finish : Epoxy Powder Coated
| Business Type | Exporter, Supplier, Trader |
| Type | Hydraulic Operating Table |
| Material | Stainless Steel |
| Feature | Hydraulic Up & Down By Pedal |
| Application | Surgery |
| Finishing | Polished |
| Adjustment Type | Adjustable |
| Sections | Head, Leg, Pelvic, Kidney Bridge |
• Hydraulic up & down by pedal.
• Center Pillars.
• Stainless Steel Fitting
• Detachable : head , leg & pelvic section
• In built kidney bridge.
• Five sectional radio – Translucent Top
• Base & Cover mode of attractive, easy to clean Stainless Steel
• Sophisticated mechanics provide smooth, step less articulation
of the table top for precise patient positioning.
| Business Type | Exporter, Supplier, Trader |
| Finishing | Pretreated & Epoxy Powder Coated |
| Color | White |
| Material | Mild Steel |
| Type | Hospital ICU Bed |
| Sections | 4 |
| Side Rails | ABS Molded |
| Overall Size | 2140L X 910W X 460-700H MM |
| Head Panel | ABS Engineering Plastic |
• Frame work made of Rectangular M.S. Tube
• 4 section top made up of perforated CRCA MS Sheet.
• Four Pieces individual side rails, ABS Molded.
• Removable & interchangeable high quality beautiful
• S.S. Telescopic IV Rod with 4 Locations
• Overall Size: 2140L x 910W x 460-700H MM.
• Finish: Pretreated & Epoxy Powder Coated
ABS engineering plastic head panel and foot panel
| Business Type | Exporter, Supplier, Trader |
| No Of Legs | 4 Legs |
| Type | Hospital Attendent Bed |
| Overall Size | 180 L X 60 W X 46 H Cms |
| Frame Material | CRCA |
| Top Material | Foam Padded Covered With Rexine |
| Shape | Rectangular |
| Finish | Epoxy Powder Coated |
• Overall Size: 180 L x 60 W x 46 H cms.
• Frame work made of rectangular / Square CRCA Tube
• 5 cm foam padded top covered with Rexine.
• Legs fitted with PVC Stumps.
• Finish: Epoxy Powder Coated
| Business Type | Exporter, Supplier, Trader |
| Finishing | Pretreated & Epoxy Powder Coated |
| Type | Semi Fowler Bed |
| Material | Stainless Steel |
| Shape | Rectangular |
| Sections | 2 |
| Castor Diameter | 100mm |
| Overall Size | 2140L X 910W X 600H MM |
• Bed Frame work made of Rectangular M.S. CRCA Tube
• 2 section top made up of perforated CRCA MS Sheet.
• Two Pieces collapsible safety side rails.
• Removable & interchangeable high quality beautiful ABS
head panel and foot panel.
• Bed Mounted on noiseless 100mm Dia Castor. 2 with
brakes.
• SS. Telescopic IV Rod with 4 Locations
• Overall Size: 2140L x 910W x 600H MM.
• Finish: Pretreated & Epoxy Powder Coated
| Business Type | Exporter, Supplier, Trader |
| Type | Baby Cradle |
| Material | Mild Steel |
| No Of Wheel | 4 Wheel |
| Application | Used For Baby |
| Height | 90 Cm |
| Side Border | 3 Side |
| Grade | EN8 |
• SS framework, PU foam mattress top.
• 3 side border and under shelf provision
• Height: 90 cm approx.
| Business Type | Exporter, Supplier, Trader |
| Type | Delivery Table |
| Material | Mild Steel |
| Finish | Epoxy Coated Finish |
| Sections | 3 Sections |
| Size | 1680 X 620 X 800 Mm |
| Adjustable Features | Back Rest & Leg Rest |
| Additional Features | Mounted On Protective Stumps |
| Dimensions | 1680 X 620 X 800 Mm |
• Delivery Table / Bed, made in 3 sections.
• Size: 1680 × 620 × 800 mm.
• With adjustable Back rest & leg rest to varying positions.
• Framework made of Mild Steel Epoxy coated finish.
• Supplied with S.S. bowl and two leg holders.
• Mounted on protective stumps.
• Freight saving knock-down construction.
| Business Type | Exporter, Supplier, Trader |
| Type | Hospital Delivery Bed |
| Material | Mild Steel |
| Finish | Pre-Treated & Epoxy Powder Coated |
| Sections | Two |
| Leg Section | Swivel Castors With Brakes |
| Top | Two Section Cushioned |
| Adjustability | Height Adjustable |
| Dimensions | 72x30x30 ( LxWxH ) |
• Tubular frame work made in two sections
• Body section with legs mounted on PVC stumps
• Leg section on swivel castors with brakes
• Two section cushioned top
• Height adjustable a pair of knee crutches
• Pre treated & epoxy powder coated.
• Length 72”,Width 30’,Height 30”.
| Business Type | Exporter, Supplier, Trader |
| Shape | Rectangular |
| Material | Mild Steel |
| Type | Plain Bed |
| Finishing | Epoxy Powder Coated |
| Dimensions | 2060L X 900W X 600H Mm |
| Feature | Four I.V. Rod Locations |
| Application | Hospitals |
• Frame work made of Rectangular M.S.Tube
• Top made of perforated M.S. Sheet.
• Location for Four I.V. Rod.
• Overall Size: 2060L x 900W x 600H mms.
• Finish: Epoxy Powder Coated
| Business Type | Exporter, Supplier, Trader |
| Type | Obstetric Delivery Bed |
| Material | Mild Steel |
| Finish | Epoxy Powder Coated |
| Sections | Two |
| Additional Features | Lithotomic Rods, Padded Leg Holder |
| Mattress Type | PU Foam |
| Usage | Obstetric Delivery Procedures |
| Cleaning | Easy To Clean |
• Framework constructed with Mild steel material. Two
section table top, body section on PVC rubber
stumps and leg section is on four swivel castors, two
with breaks.Epoxy powder coated finishing.
• Fitted with Lithotomic rods and padded leg holder.
Top is covered with PU foam water proof mattress.
Solid body with easy to clean.
| Business Type | Exporter, Supplier, Trader |
| Type | Examination Couch |
| Material | Upholstered Synthetic Material |
| Size | 1830 (L) X 510 (W) X 810 (H) Mm |
| Drawers | Three |
| Door Type | Separate |
| Application | Patient Examination |
| Washable | Yes |
• Top is upholstered and covered with washable
synthetic material
• Three individual drawers and three cabinets with
separate door at bottom
• Size- 1830 (L) x 510 (W) x 810 (H)
| Business Type | Exporter, Supplier, Trader |
| Type | Examination Table |
| Size | 183 L X 60 W X 81 H Cms |
| Material | CRC Tubes |
| Finish | Pre-treated And Epoxy Powder Coated |
| Top Material | Foam Cushioned Top Covered With Rexene |
| Usage/Application | Medical Examination |
| Cushion Material | Rexene |
• Overall size 183 L x 60 W x 81 H cms.
• Frame work of CRC tubes.
• Legs fitted with PVC stumps. 5 cms foam cushioned top
covered with Rexene.
• Finish : Pre-treated and Epoxy Powder Coated.
